Back to blog

PUDU CC1 Pro Disc Released: New Dual-Disc Autonomous Floor Scrubber

7/31/2026 ·8 min ·Mobotics

PUDU has introduced the CC1 Pro Disc, an AI-native mid-size autonomous scrubber-dryer designed around a high-speed dual-disc cleaning system. The launch expands the CC1 family with a model focused on deep hard-floor scrubbing, consistent down pressure, and maneuverability in active commercial environments.

The most important launch specifications are:

  • Dual high-speed disc brushes
  • 25 kg (55.1 lb) of consistent down pressure
  • 700–1,000 m²/h (7,535–10,764 ft²/h) full-coverage scrubbing
  • 1,500–3,000 m²/h (16,146–32,292 ft²/h) spot scrubbing
  • Up to 5.3 hours of scrubbing runtime
  • 68 cm (26.77 in) minimum path clearance
  • LiDAR + 3D VSLAM fusion positioning
  • 69 Ah battery and approximately 4.5-hour charging
  • Optional 18-inch smart marketing display

See the complete PUDU CC1 Pro Disc product page.

PUDU CC1 Pro Disc autonomous dual-disc floor scrubber

What is the PUDU CC1 Pro Disc?

The PUDU CC1 Pro Disc is a mid-size autonomous floor scrubber that uses two high-speed disc brushes instead of relying on a single cleaning head. PUDU specifies 25 kg of consistent downward scrubbing pressure to remove stubborn stains and debris from hard floors.

Its compact body is listed at:

  • 629 mm long
  • 552 mm wide
  • 695 mm high
  • 80 kg operating weight

That combination places the machine between compact indoor cleaning robots and larger industrial scrubber-dryers. It is especially relevant where operators need meaningful scrubbing pressure but still have narrow aisles, carts, displays, boxes, or changing pedestrian traffic.

How does the new dual-disc cleaning system work?

The cleaning head uses two high-speed disc brushes to maintain contact with the floor. According to PUDU’s launch sheet, the system applies 25 kg of consistent down pressure for deep cleaning.

That matters because disc scrubbing performance depends on more than navigation. Brush speed, pad or brush selection, chemical program, floor finish, soil type, and down pressure all affect the result.

PUDU CC1 Pro Disc dual-disc brushes with 25 kg down pressure

Quick-release magnetic brushes

The CC1 Pro Disc uses a magnetic quick-release attachment intended to simplify:

  • Brush alignment
  • Installation
  • Removal
  • Changeovers between cleaning tasks

PUDU also states that the platform supports multiple disc brushes and pads. Facility teams should select the correct consumable for the floor finish and soil load rather than treating every brush or pad as interchangeable.

What is AI Magic Cleaning?

PUDU describes the CC1 Pro Disc as an AI-native cleaning robot. Its AI Magic Cleaning feature set includes:

  • AI Adaptive Cleaning
  • Real-time cleaning performance detection
  • Guided cleaning
  • Summon cleaning

The stated goal is to adjust cleaning strategies based on environmental conditions and observed cleaning results. In a live deployment, the value should be measured through repeatable outcomes: coverage completion, intervention time, stain removal, water recovery, route reliability, and labor hours redirected.

How productive is CC1 Pro Disc?

PUDU lists two cleaning productivity ranges:

Cleaning mode Published productivity
Full-coverage scrubbing 700–1,000 m²/h (7,535–10,764 ft²/h)
Spot scrubbing 1,500–3,000 m²/h (16,146–32,292 ft²/h)

Actual site output will depend on route geometry, obstacle density, speed settings, water stops, soil load, and how frequently the robot must yield to people or equipment.

The published scrubbing runtime is up to 5.3 hours, with 3.8 hours in Standard Mode. Charging is listed at approximately 4.5 hours.

Is CC1 Pro Disc suitable for retail aisles?

The minimum listed path clearance is 68 cm (26.77 inches). PUDU specifically positions the compact design for turning and obstacle avoidance around shopping carts, boxes, and temporary obstructions.

That makes supermarkets and retail stores obvious use cases, but clearance alone does not guarantee deployment fit. An onsite assessment should also verify:

  • End-cap and aisle turning geometry
  • Cart and pallet staging behavior
  • Customer traffic periods
  • Floor transitions and thresholds
  • Emergency egress requirements
  • Water fill, drain, and charging locations

CC1 Pro Disc quick-release brush and 68 cm retail aisle clearance

What does the optional 18-inch display do?

An optional 18-inch smart marketing display supports portrait and landscape orientations. PUDU says it can present:

  • Brand advertising
  • Promotional content
  • In-store information

This creates a combined cleaning and communication use case for supermarkets, retail stores, malls, and promotional zones. The display is optional, not a standard feature on every CC1 Pro Disc configuration.

CC1 Pro Disc vs. CC1 Pro

The two names are similar, but the cleaning emphasis is different.

Choose CC1 Pro Disc as the starting point when:

  • Deep hard-floor scrubbing is the primary workflow
  • Dual-disc pressure is important for the floor and soil type
  • The site needs a compact scrubber with a 68 cm clearance requirement
  • Quick brush or pad changes are operationally valuable

Evaluate the existing CC1 Pro when:

  • The site needs a broader 4-in-1 workflow
  • Sweeping, vacuuming, mopping, and scrubbing all matter
  • Carpet or mixed-surface requirements are part of the route

Compare the existing PUDU CC1 Pro.

The correct choice should be based on a floor test. A model name or specification sheet cannot replace evaluating cleaning results on the actual surface.

CC1 Pro Disc vs. PUDU BG1

The CC1 Pro Disc is a mid-size platform with 68 cm minimum path clearance and dual-disc hard-floor scrubbing.

The PUDU BG1 is positioned for larger-area cleaning, including one-pass sweeping and scrubbing across industrial, logistics, retail, and property environments.

Explore the PUDU BG1.

For larger sites, the decision should compare:

  • Route width and turning constraints
  • Required cleaning throughput
  • Soil and debris type
  • Runtime and charging windows
  • Water servicing requirements
  • Edge-cleaning expectations
  • Fleet size and supervision

Who should evaluate the CC1 Pro Disc?

The launch specifications make the CC1 Pro Disc relevant to:

  • Supermarkets and grocery stores
  • Retail stores and shopping centers
  • Healthcare facilities
  • Schools and universities
  • Hotels and hospitality properties
  • Corporate facilities
  • Commercial real estate operators

It may also fit other hard-floor environments where a mid-size autonomous scrubber needs to move through tighter routes.

Frequently asked questions

Is PUDU CC1 Pro Disc available in the United States?

Mobotics USA is accepting inquiries for launch pricing, availability, onsite demos, and deployment planning. Availability and lead time should be confirmed for each project.

How much does PUDU CC1 Pro Disc cost?

PUDU’s supplied launch sheet does not list MSRP. Contact Mobotics for current pricing, configuration, shipping, installation, and support information.

What brushes and pads work with CC1 Pro Disc?

PUDU states that the robot supports multiple disc brushes and pads. Exact consumable selection should be matched to the floor finish and cleaning requirement. Do not assume that CC1 roller brushes or BG1 disc consumables are compatible.

Can CC1 Pro Disc show advertisements while cleaning?

Yes, when equipped with the optional 18-inch smart marketing display. The screen supports portrait and landscape content.

Can I book a CC1 Pro Disc demonstration?

Yes. Request a CC1 Pro Disc demo or contact Mobotics USA to discuss the site, floor type, route, and launch availability.

Source and specification note

Specifications in this article are taken from the PUDU CC1 Pro Disc launch product sheet supplied to Mobotics in July 2026. Product configuration, availability, performance, and specifications may change. Confirm current details during quoting and validate cleaning performance in the intended facility.