AI-Powered Autonomous Floor Cleaning
CC1 Pro combines AI vision, multi-mode cleaning, and automated docking to deliver consistent, data-driven cleaning in malls, healthcare, education and more.
Key Capabilities
CC1 Pro combines AI perception, flexible cleaning modes, and robust hardware to automate daily floor care in complex environments.
Real-Time Cleaning Performance
Dynamic Intensity Control
Components Self-Monitoring
4-in-1 Cleaning Modes
VSLAM+ Navigation
AI-Driven Perception
IEC 63327 Certified
PUDU VSLAM+
Unlimited by space, unmatched in cleanliness. Powered by a fusion of VSLAM and LiDAR, CC1 Pro navigates complex environments with high accuracy—no QR codes required. Paired with AI-powered spot cleaning, it covers 5,000–8,000 m², enabling smart upgrades in large-scale spaces.
AI Spot Scrubbing
Targeted cleaning for precision and efficiency. CC1 Pro detects common wet stains like coffee spills and puddles in real time during inspections and automatically generates optimal cleaning routes.
Cleaning rate: 1,500–3,000㎡/h, depending on mode and layout.
AI Cleaning Intensity Control
CC1 Pro intelligently adjusts cleaning intensity based on floor type, soil level, and real-time feedback, optimizing water and energy use while maintaining a high standard of cleanliness.
Stubborn Stains Detection
Detects stubborn stains and boosts cleaning power as needed, ensuring deeper, more thorough cleaning.
Floor Cleanliness Monitoring
Monitors floor cleanliness and automatically switches modes—eco mode for clean areas, deep cleaning for dirty spots—to optimize resources.
Floor Type Detection
Automatically adjusts modes based on floor type—sweep-and-vacuum on hard floors, vacuum-only on carpets—for effective dust and debris removal.
AI Real-Time Cleaning Performance Detection
CC1 Pro features a rear AI camera to monitor cleaning performance in real time. It detects leftover stains, triggers spot re-cleaning, and generates heatmaps after each task for clear insight into cleaning results.
AI Components Self-Monitoring
CC1 Pro continuously monitors critical cleaning components, detects maintenance-related issues that can cause secondary contamination, and triggers automatic marking, touch-up cleaning, or self-cleaning.
Omni-Sense Safety
An AI-driven perception system constantly detects static and moving obstacles for safe operation and full cleaning coverage. The recognition model evolves over time, expanding obstacle types to adapt to diverse environments.
Versatile Cleaning
All-in-one cleaning solution: sweeping, scrubbing, vacuuming and dust-mopping, with intelligent mode switching to match your space.
Transforming Data into Actionable Insights
The operation dashboard surfaces task completion, runtime anomalies, maintenance events and more, so your team can manage multiple robots from one view.
Cleaning System Upgrade
Compliant with IEC 63327 standards, with enhanced durability, simplified maintenance, and improved cleaning power for high-traffic environments.
Outstanding IoT Compatibilities
CC1 Pro integrates with building systems and digital tools, making it easy to connect with access control, elevators and remote monitoring.
Manage with Pudu Link app
E-gate Control
Elevator Control
Work Station Series
The optional workstation automates charging, water refill and drainage, and component self-cleaning to keep CC1 Pro ready for the next shift.
Auto Water Refill & Drainage
Automatically handles water refill and drainage for a more efficient and effortless cleaning experience.
Auto Power Charging
Automatically returns to the docking station for charging, ensuring extended run-time.
Self-cleaning
Supports self-cleaning of the roller brush and squeegee to maintain consistent cleaning performance.
Product Overview
Battery Capacity
50 Ah
Charging Time
About 3 hours
Run-time
Scrubbing: 5 hours
Sweeping & Vacuuming: 5 hours
Carpet Vacuuming: 4 hours
Silent Mopping: 9 hours
Cleaning Capabilities
Sweeping, (Carpet) Vacuuming, Dust Mopping, Scrubbing
Weight
~165 lbs
Dimensions (L × W × H)
24.8 × 21.7 × 27.4 in
Display
10.1-inch LCD Screen
Navigation
LiDAR + Visual Fusion Positioning
Cruising Speed
0.7–3.9 ft/s (Adjustable)
Minimum Path Clearance
28 in
Cleaning Width (with side brush)
19.7 in
Cleaning Efficiency
All-covered cleaning: ~7,500–10,800 sq ft/hour
Spot/intensive cleaning: ~16,000–32,000 sq ft/hour
Dustbin Capacity
0.66 gal (bin)
1.59 gal (dust bag)
Water Tank Capacity
Clean/Dirty Water Tanks: 4.0 gal each
Communication
4G, Wi‑Fi, Bluetooth, E‑gate & Elevator Control (Optional)
Auto Charging & Water Refill/Drain
Supported (Requires Optional Docking Station)
CC1 Pro
Intelligent Commercial Cleaning Robot
Category: Commercial Cleaning Robots
Functions: cleaning
MSRP: $35,995
Warranty: 1 year warranty
Technical Specifications
| cleaning Mode | Sweeping/Mopping/Scrubbing/Vacuuming |
| clean Water Tank | 15 L |
| waste Water Tank | 15 L |
| charging Time | < 3 h |
| scrubbing | 5 h |
| sweeping Vacuuming Mopping | 5 h |
| carpet Vacuuming | 4 h |
| silent Mopping | 9 h |
| cleaning Operating Noise | < 70 dB(A) |
| cruise Speed | Max 1.2 m/s (Max 3.94 ft/s) |
| suction | Max 17000 Pa |
| cleaning Efficiency | 700-1000 ㎡/h (7534.74-10763.92 ft²/h) |
Features & Capabilities
- 4-in-1 Versatile Cleaning: Sweeping, scrubbing, vacuuming, and mopping functions in one.
- Super Suction Power: 17000 PA No stain left behind.
- Suitable for both hard floors and soft carpets.
- Extendable Steering Handle for Ease of Operation.
- Breakpoint Resume Cleaning: Remembers cleaning progress and resumes after charging.
- Intelligent Lift Control.
- PUDU SLAM Navigation Solution: Supports both visual SLAM and laser SLAM.
- Automatic Water Addition & Drainage: No need for plumbing modifications.
- Auto Charging: Automatically returns to the charging station when power is low.
- Digital Cleaning: Real-time notifications for cleaning performance.
- Digitization and visualization of cleaning effects.
- Quick Show (map-free demonstration mode) for rapid proof-of-capability and temporary cleanups.
- Automatic Edge Cleaning V1.0 with independent edge speed control for better perimeter consistency.
- Quick On-site Test for faster post-mapping validation and risk detection before full deployment.
- Alternating Passage Zone V2.0 strategy to reduce congestion with AGVs, forklifts, and third-party robots.
- Guided Cleaning Mode to route operators directly to stubborn-stain locations after automated passes.
- Ultra Spot Cleaning to prioritize historically high-dirt, high-traffic zones.
- Summon Cleaning V1.0 collaboration support with MT1 for mixed wet/solid debris workflows.
- Task-node timeline reporting for pauses, resumptions, interruptions, returns, and skip reasons.
- Optional Strict Maintenance Mode to block unattended auto-starts until maintenance criteria are met.
- AI exemption controls (manual + automatic) to reduce recurring false positives on difficult floors.
- OTA AI recognition model updates to improve detection performance without full platform upgrades.
Operational Highlights
- Faster launch and onboarding with map-light workflows (Quick Show + Quick On-site Test).
- Improved cleaning quality at edges and recurrent trouble zones (Edge + Ultra Spot + Guided Cleaning).
- More reliable mixed-device hallway operation (Alternating Passage Zone V2.0).
- Stronger supervisor visibility with detailed task timeline event records.
- Better governance in strict environments with maintenance-gated scheduling options.
Latest Software Updates (CC1 Series)
These updates apply to CC1 and CC1 Pro deployments and highlight operator-facing improvements from the two most recent releases.
SC5.23.16
Mar 2026Operations-focused release for faster demos, automatic edge behavior, post-map validation, and stronger task traceability.
- Quick Show mode starts demo cleaning without full map/task setup.
- Automatic Edge Cleaning V1.0 with tunable edge speed (0.2-0.8 m/s).
- Quick On-site Test verifies congestion/risk points and supports live map edits.
- Alternating Passage Zone V2.0 improves congestion handling around AGVs/forklifts.
- Task reports now record pause/resume/interruption/cancel reasons and return events.
- Optional Strict Maintenance Mode blocks auto-start until maintenance is confirmed.
SC5.19.41
Feb 2026Feature update centered on targeted cleaning loops, AI accuracy improvements, and multi-robot collaboration.
- Guided Cleaning Mode leads operators to stubborn-stain locations after autonomous runs.
- Ultra Spot Cleaning prioritizes historically high-traffic/high-dirt zones.
- Summon Cleaning V1.0 coordinates CC1 series with MT1 for mixed mess handling.
- AI manual + automatic exemption reduces recurring false positives on patterned floors.
- AI recognition models can be updated OTA independently of full firmware.
- Added hibernation windows and richer cancellation/interruption reasons in reports.
Pricing Information
Contact Us
Product Images
Product Videos
Use Cases & Applications
- Office Building
- Education
- Retail
- Food & Beverage
- Public Transportation
- Health Care
- Manufacturing
- Hospitality
Documentation
Contact Us for more information.
CC1 Pro in Action
Hotel Cleaning Robot Case Studies
See how the CC1 Pro compressed a 6-hour hotel ballroom clean to 75 minutes and delivered resort-grade floor finish at Chateau Mar Golf Resort.
Read case studies →Accessories & Consumables
Official PUDU add-ons and replacement parts for CC1 Pro. Each item has a dedicated page with compatibility details.
Accessories
Additional Battery
Extends the robot's operational time for longer cleaning sessions.
From $1,995
View details → Carpet Vacuum Module
Enhances cleaning performance on carpets and rugs.
From $995
View details → CC1 Docking Station
Automatically empties the dustbin for up to 30 days of operation.
From $3,995
View details → CC1 Self-Cleaning Docking Station
Automatically cleans the robot's brushes and mop after each cleaning cycle.
From $4,895
View details → Charging Adapter for additional battery
Allows simultaneous charging of the additional battery.
From $595
View details →
Elevator IoT Module
Enables integration with elevator systems for seamless transportation.
From $4,995
View details → Expandable Waste Container
Optional accessory, dust removal, single roller brush version, large capacity.
From $295
View details → Mobile Water Tank
Facilitates easy refilling and transportation of water for mopping tasks.
From $2,395
View details →Consumables
CC1 Dust Filter
HEPA-style dust filter replacement for CC1-series vacuum and sweep paths.
$35
View details → CC1 Mop Pad Set
Microfiber mop pad replacements for CC1 wet mopping modules.
$55
View details → CC1 Scrub Brush Kit
Replacement scrub brush set for PUDU CC1 and CC1 Pro roller and disc configurations.
$89
View details →
CC1 Squeegee Rubber
Replacement squeegee blade rubber for consistent water pickup on hard floors.
$45
View details →Admin suite
Manage this robot with the Robot Management Suite
A complete suite for admins to manage service robots across your facility: maps and map elements, task creation and editing, maintenance visibility, and logs and reports.
Includes
- Maps + map element editing
- Task creation + task updates
- Maintenance workflow visibility
- Logs, reports, and troubleshooting
- Support for the full PUDU lineup